Manuals / Hearth and Home Technologies / Kitchen Appliance / Range

Hearth and Home Technologies VRT-GR-N-CE manual Reference Materials, Appliance Dimension Diagram

Models: VRT-GR-P-CE VRT-GR-B-CE VRT-BZ-P-CE VRT-BZ-N-CE VRT-GR-N-CE VRT-GY-B-CE VRT-BZ-B-CE VRT-GY-N-CE VRT-GY-P-CE VRTIKL-CE

1 44

Download 44 pages 45.21 Kb

Page 35

12 Reference Materials

A. Appliance Dimension Diagram

Dimensions are actual gas stove dimensions. Use for reference only. For clearances to combustibles refer to Section 3.

A

B

Height includes 9.53 mm hearth pad.

C

D

E

F

G

Hearth Pad

I

H

	A	B	C	D	E	F	G	H	I
Centimeters	47.9	104.5	103.5	40.3	7.6	18.1	76.2	73.3	86.7

Figure 12.1 Appliance Dimensions

Heat & Glo • VRTIKL-CE • 7031-292 Rev E • 12/07

35

Image 35

Hearth and Home Technologies VRT-GR-N-CE, VRTIKL-CE, VRT-GY-P-CE manual Reference Materials, Appliance Dimension Diagram

Contents

Do Discardnot What to do if you smell gasDo not Discard this Manual Serial No Model Name Test Lab Report No Manufactured Date Table of Contents Combustible Materials 1Listing and Code ApprovalsAppliance Certiﬁcation Non-Combustible Materials Inspect Appliance & Components Design & Installation ConsiderationsGetting Started 15.2 25.7 30.8 137.2 91.4 78.1 33.7 39.4 3Appliance Location and ClearancesSelecting Appliance Location Clearances to Combustibles 10.2 78.1 91.4 Optional Stone Surround Installed Flue Termination Minimum Clearances 4Termination Locations Gas stove Alcove Applications Measuring Standards Flue InformationFlue Components Use of Elbows For Natural, Propane and Butane Gases Flueing Diagrams Natural Gas One 90 0 Elbow System Natural Gas Two 90 0 Elbows System Min H1 Max H1 + H2 Max Natural Gas Two 900 Elbows System V1 Min Max Natural Gas Three 90 0 Elbows System Step Horizontal Termination Before YOU Begin Slim Line Wall Thimble FIG. B Minimum Clearance Balance Flue Pipe Vertical Termination Secure Flashing with NON-HARDENING Sealant Roofing Nails Twist-lock the flue cap and seal Vertical Flue Restrictor Check for GAS Leaks Gas InformationGas Pressure Requirements Gas Connection Shock Risk Ignition System Wiring7Electrical Information Leveling and Bolting Down the Appliance Appliance SetupRemove Shipping Materials Unbolting Appliance from the Pallet On TOP of Appliance AccessoriesTop to Rear Flue Conversion On Back of Appliance Installing the Bafﬂe Placing Mineral Wool Positioning the Logs Cap and Barrel Fastener System Before Lighting Appliance Operating Instructions Do not Connect 240 VAC to the Control Valve Lighting the Appliance After Appliance is Lit Frequently Asked QuestionsInitial Break-in Procedure After servicing Maintaining and Servicing Appliance Inspect Maintenance Tasks Maintenance Tasks Electronic Ignition System TroubleshootingSymptom Possible Causes Corrective Actions 47.9 104.5 103.5 40.3 18.1 76.2 73.3 86.7 Appliance Dimension DiagramReference Materials 75.3 62.0 76.8 42.8 86.7 112.6 Appliance Dimension with Stone Surround Diagram SL-09D SL-12/17D SL-24D SL-36D SL-48D Flue Components Diagram Termination Kits Flue Components ListComponents Log Set Assembly Service Parts P2B/B2P-VRT-CE Description Serial # Part Number Valve Assembly REM-DLX-CE Warranty Policy Heat & GLO Limited 10 Year Warranty Contact Information Your Records for Model