Heat & Glo LifeStyle 8000CFLP-OAKIPI owner manual Completing Grate Set-up, Checking Pilot Plate

E. Completing Grate Set-up

1.Straighten the tabs on the grate bracket (see Figure 9.6) and remove grate from unit.

2.Remove grate bracket (see Figure 9.6) by bending it

Îback and forth until it breaks. Discard grate bracket.

3.Remove 4 tabs holding base refractory (see Figure 9.6) by bending tabs back and forth until they break.

4.Reinstall grate into unit (see Figure 9.7).

STRAIGHTEN TO

REMOVE GRATE

REMOVE GRATE

REMOVE GRATE BRACKET

REMOVE TAB HOLDING DOWN

BASE REFRACTORY (4 PLACES)

Figure 9.6 Removing Grate

F. Checking Pilot Plate

Note: Ensure pilot plate is in place. This will ensure pilot stability (see Figure 9.8)

PILOT

PLATE

Figure 9.8

RE-INSTALL
INTO THE UNIT
Figure 9.7	Re-install grate in unit
34	Heat & Glo • 8000CF-OAK-IPI • 2059-900 Rev. R • 6/09