9 Appliance Preparation
A. Top Vent
CAUTION! Risk of Cuts, Abrasions or Flying Debris. Wear protective gloves and safety glasses during instal- lation. Sheet metal edges are sharp.
NOTICE: Once appliance is set up for top or rear venting, it CANNOT be changed at a later time.
Figure 9.1 Cut the seal cap strap across the rectangles next to the disk.
Figure 9.3 Remove the seal cap.
NOTICE: Once the seal cap has been removed it CANNOT be reattached.
Figure 9.2 Remove the white gasket material covering the seal cap.
Figure 9.4 Remove the insulation basket and white insula- tion from the center vent pipe.
Figure 9.5 Remove the insulation from the outer vent pipe. For rear venting there is no insulation in the outer vent pipe.
Heat & Glo • | 37 |
