Heat & Glo LifeStyle Escape-42DVLP owner manual C. Installing Non-combustibleFacing Material

C. Installing Non-combustible Facing Material

WARNING

Fire Risk.

•Follow these instructions exactly.

•Facing materials must be installed properly to prevent fi re.

•No materials may be substituted without authorization by Hearth & Home Technologies.

•Center and attach two top boards to the framing members. See Figure 9.2.

•Attach left and right side pieces to framing members.

•Use fasteners from fastener packet (in manual bag) in shaded areas.

•Use regular sheetrock screws in non-shaded areas.

•Use a wet or dry towel or soft brush to remove dust or dirt from facing material.

•Apply a non-combustible adhesive to attach tile, stone or other non-combustible fi nishing materials per manufacturer’s instructions.

NON-COMBUSTIBLE

ZONE

43 in.

60 in.

Figure 9.3 Complete Installation of Non-combustible Facing

Material

NON-COMBUSTIBLE
FACING MATERIAL
(9 IN. WIDE, SUPPLIED ATTACHED TO
BACK OF APPLIANCE)
	9 IN.
NO FASTENERS	2 IN.
IN THIS AREA
	1 IN.
	APPLY FASTENERS
FROM FASTENER PACKET
	IN THESE AREAS
Figure 9.2 Attaching Non-combustible Facing Material
	Heat & Glo • Escape-42DV • 2052-900 Rev. Y • 11/11	33