LOG #3 (SRV2052-083):
Place Log #3 onto the back of the burner. The log sits on top of the burner surface. The back of the log is pushed up against the back metal wall of the burner and the left end of the log is fl ush with the left edge of the metal wall.
LOG #4 (SRV2012-084):
Place Log #4 on top of the burner in front of Log 3. The triangle shaped groove in the bottom fi ts onto the right grate tine. The left end of the log will fi t the contour of the burner between the ports. DO NOT cover the burner ports.
LOG #5 (SRV2012-085):
Place Log #5 in front of Log #4. The groove in the bottom end of the log
FLUSH END
3
3
4
fits into the right vertical grate tine. The back of the log rests in the small fl at spot on top of Log #3.
3
5
4
50 | Heat & Glo • |