B. Rear Vent
NOTICE: Once appliance is set up for top or rear venting, it CANNOT be changed at a later time.
Figure 9.5 Cut the metal retaining band.
Figure 9.6 Remove the seal cap.
NOTICE: Once the vent cap has been removed it CANNOT be reattached.
Figure 9.7 Discard the seal cap, insulation plug and the insulation basket.
Figure 9.8 Attach the first vent section (it will snap into place). Slide the vent gasket onto the vent section and then, up against the appliance. Secure the vent gasket to the appliance with two
Heat & Glo • | 41 |
