Heat & Glo LifeStyle ST-36TRB-IPI B. Vent Components Diagrams continued, Slp-Snkd, Slp-Ccs-Bk

B. Vent Components Diagrams (continued)

Note: Heat shields MUST overlap by a minimum of 1-1/2 in. (38 mm). The heat shield is designed to be used on a wall 4 in. to 7-1/4 in. (102 mm to 184 mm) thick. If wall thickness is less than 4 in. (102 mm) the existing heat shields must be field trimmed. If wall thickness is greater than 7-1/4 in. (184 mm) a DVP-HSM-B will be required.

8 in. (203 mm)

Heat

Shield

15-1/8 in.

(384 mm)

	Max
12 in.	Effective
(305 mm)	Length

SLP-TRAP

Horizontal Termination Cap

Term Cap	Minimum	Maximum
	Effective Length	Effective Length
Trap1	3-1/8 in.	4-3/4 in.
	79 mm	121 mm
Trap2	5-1/4 in.	9-1/4 in.
	133 mm	235 mm

SLP-SNKD	SLP-CCS-BK	SLP-TVHW		DVP-FBHT
	Cathedral Ceiling	Vertical		Horizontal
Snorkel
	Support Box-Black	Termination Cap		Termination Cap
Termination Cap
				26 in.
				660 mm
	SL-2DVP	DVP-2SL		DVP-HSM-B
	Adapter	Adapter	Extended Heat Shield

SLP-DCF-BK	SLP-WT-BK
Ceiling Firestop	Wall Thimble-Black
Black

Figure 16.10 SLP Series Vent Components

Heat & Glo • ST-36TRB-IPI, PIER-36TRB-IPI, LCOR-36TRB-IPI, RCOR-36TRB-IPI • 2128-900 Rev. H • 8/11 75