F. Install the Log Assembly
Log Set Assembly: LOGS-2128
Models:
CAUTION: DO NOT reposition logs that have been factory installed! Follow these instructions to position the logs that were packaged separately.
3 2 1
Figure 1. Log Assembly Location
B | C | PILOT |
|
|
D A
Figure 2. Factory Installed Logs
STEP 1. CAUTION! Logs are fragile! Carefully remove the logs and cardboard tray from the inside of the fireplace. See Figure 1. Remove the microfoam and inspect the logs for damage. Inspect the four factory installed logs for damage. Locate the pilot in order to verify your position in relation to the appliance. See Figure 2.
1
Figure 3. Placement of Log #1
NOTCH
HUMP
1
C
A
Figure 4. Placement of Log #1
STEP 2. Log #1
Heat & Glo • | 61 |
