Heath Zenith 598-1135-08 Outdoor Motion Sensor Coverage Area, Motion Sensor Controls

3.Adjust RANGE Control.To increase sensitivity, turn the RANGE control toward MAX. To decrease sensitivity, turn the RANGE control toward MIN. Note: If the RANGE is set too high, false triggering may result in some environments.

Note: When using test mode to check operation in the day time:

A.Set the DETECT control switch to DAY/NIGHT and

B.Set the ON-TIME control to TEST.

4.Set ON-TIME Control. Determine the amount of time you want the connected device to stay on after motion is detected (1 or 5 minutes). Slide the ON-TIME control to the corresponding setting.

IMPORTANT: Avoid Aiming Control At:

•Objects that change temperature rapidly, such as heating vents, fans, and air conditioners. These air sources could cause false triggering.

•Areas where pets or traffic may trigger the control.

•Nearby large, light colored objects reflecting light may trigger the shut-off feature. Do not point other lights at the sensor.

Outdoor Motion Sensor

ON-TIME Control	ON-TIME	RANGE
	(MINUTES)	MAX MIN

5 1 TEST

180°

8ft.

(2.4 m)

70ft.

(21 m)

Maximum Range			Maximum
		Coverage Angle
	Outdoor Motion Sensor Coverage Area
			Motion
	Motion
	Sensor		Sensor
Least Sensitive		Most Sensitive

The detector is most sensitive to motion across its field of view.

Indoor and Outdoor Motion Sensor Sensitivity

LED

Indicator

CODE	DETECT		ON-TIME RANGE
			(MINUTES)
	DAY	NIGHT	5 1 TEST
1 2 3 4 NIGHT		ONLY	MIN	MAX

Indoor Motion Sensor

Range Control

Aim Sensor Down	Aim Sensor Higher
for Short Coverage	for Long Coverage

Motion Sensor Controls

150°

30ft.

(9.1 m)

Maximum RangeMaximum Coverage Angle

Indoor Motion Sensor Coverage Area

Adjusting Indoor Motion Sensor Coverage
Aim Sensor Down	Aim Sensor Higher
for Short Coverage	for Long Coverage

Adjusting Outdoor Motion Sensor Coverage

598-1135-08