4.Push either the top or bottom of DIM button and release. The light should turn on at 50% brightness (or last setting).

5.Push and release top of DIM button to increase brightness. Push and release bottom of DIM button to decrease bright- ness. Note: There are 5 DIM settings ranging from 15% to 90% brightness.

6.Set desired DIM level. Note: DIM setting remembers last set- ting used. To recall last DIM setting from ON or OFF, push and release either the top or bottom of DIM button.

Note: The DIM setting defaults to 50% in the event of a power failure.

Bulb Replacement

Move the power disconnect switch to the OFF (left side) position. Replace bulb(s).

CAUTION: Do not exceed the maximum load limits listed above.

Receptacle Receiver

Features and Ratings:

• Control up to 1800 Watts of incandescent load.

• Controls the ON/OFF function in lighting.

• Controls up to 15A loads.

Installation

1.Remove existing receptacle from junction box, if necessary.

2.Connect green wire from receptacle to ground wire in junction box. Connect the black wire on receptacle to the load wire in junction box and connect the white wire on receptacle to the neutral wire in the junction box. Connections should appear as shown in illustration. Before installing fixture, make sure there is no wire exposed at connections.

3.Mount receptacle in junction box with the two screws (long) provided. Note: Verify the receptacle marked “CONTROLLED” is on top.

4.Screw on cover plate with the two screws (short) provided.

Receptacle

Junction Box

Receptacle

Screw

Wall Plate

Screw

Ground Wire

(Bare or Green)

Wall Plate

Controlled Outlet

 

Installing Receptacle Receiver

Testing and Operation

Follow the steps below to operate and test the receptacle receiver using a remote control device:

1.Set the proper channel codes on both the transmitter and receiver modules (see Code Settings).

2.Plug in the light fixture to be controlled in the top receptacle. Note: If installed properly, the top receptacle will be marked with the word “CONTROLLED” below it.

3.Operate the ON/OFF buttons on the remote to verify operation. Light should turn ON and OFF as the appropriate button is pressed.

Note: DIM is not available on this switch.

ENGLISH

598-1135-08

11

Page 10 Page 12
Page 11
Image 11
Heath Zenith 598-1135-08 Receptacle Receiver, Testing and Operation, Receptacle Screw Wall Plate Ground Wire Bare or Green
Page 10 Page 12

598-1135-08 specifications

The Heath Zenith 598-1135-08 is a state-of-the-art motion-activated floodlight designed to enhance security and visibility around your home or property. With its durable construction and advanced technological features, this floodlight offers an efficient solution for outdoor lighting needs.

One of the key aspects of the Heath Zenith 598-1135-08 is its reliable motion detection technology. Featuring a high-performance sensor, this floodlight can detect movement within a wide range, typically up to 240 degrees. This expansive field of view ensures that any activity within its range is promptly detected, providing an added layer of security for your belongings and family.

The floodlight also boasts an impressive illumination capacity. Equipped with powerful LED bulbs, it delivers bright, energy-efficient lighting that can easily illuminate large outdoor areas. The LED technology not only ensures a longer lifespan for the bulbs but also significantly reduces energy consumption, making it an environmentally friendly choice.

Another notable characteristic is the adjustable settings available with the Heath Zenith 598-1135-08. Users can easily customize the sensitivity of the motion sensor, allowing it to adapt to specific needs such as varying outdoor conditions or traffic levels. Additionally, the floodlight offers a time delay feature, permitting the light to stay on for a designated period after motion is detected, providing extra convenience.

The design of the Heath Zenith 598-1135-08 combines functionality with aesthetic appeal. The sleek, modern look of the floodlight makes it suitable for various types of homes and outdoor settings. Moreover, its weather-resistant construction ensures that it can withstand harsh weather conditions, maintaining its performance throughout the seasons.

Installation of the Heath Zenith 598-1135-08 is straightforward, making it accessible for homeowners looking to enhance their outdoor lighting without professional assistance. The adjustable head allows for directional lighting, ensuring that specific areas can be spotlighted as needed.

Overall, the Heath Zenith 598-1135-08 is an exemplary choice for homeowners seeking robust, energy-efficient outdoor lighting solutions. Its combination of advanced motion detection technology, customizable settings, and durable design makes it a valuable addition for increased security and visibility around any property.
Top Page Image Contents