D cut side of timer shaft must face away from the Linkage Timer Arm
Figure 4.21
5 | 4 | 3 | 2 | 1 |
5 4 3
10
7 | 8 | 9 |
| ||
|
|
6
Figure 4.23 Exploded View of Entire Assembly for Point of Refer- ence only
3.Place linkage control arm over timer shaft and tighten set screw. Figure 4.22.
Tighten set screw
Figure 4.22
4.Rotate linkage control arm into final position and re- attach to mounting plate. Note that the D cut is now facing the linkage timer arm.
Item | Description | Qty |
1 | Door Linkage | 1 |
2 | Linkage Control Arm | 1 |
3 | Bushing | 2 |
4 | Washer SAE #10 | 2 |
5 | Screw | 2 |
6 | Linkage Timer Arm | 1 |
7 | Attachment Nut & Set Screw | 1 |
8 | Screw | 2 |
9 | Mounting Bracket | 1 |
10 | Timer, Mechanical, 12 hours | 1 |
4/20/11 | Heatilator • Constitution EPA Fireplace • | Page 29 |