5. Timer Assembly Replacement
CAUTION Shock Risk!
Disconnect power by turning off circuit breaker BEFORE servicing.
Black Knob | Spring Handle | |
Cover Plate |
| |
Linkage Arm |
| |
| 1/4” bolts | |
Mechanical | Timer Assemby | |
Timer | ||
|
Figure 4.11 Timer Assembly
1.Remove both doors by lifting doors up and off of hinges.
2.Remove the black knob and spring handle.
3.Remove the outside air knob and then the 4 screws from each corner of fascia and remove the fascia.
Place on protected surface.
4.Remove the 3 center bricks from back of fireplace and all the floor bricks.
5.Remove 2 Phillips head screws and pry open access door in the bottom of the fireplace with a flat head screwdriver. Figure 4.12.
6.Remove 2 screws from cover plate & pull cover plate toward you. Figures 4.13 & 4.14. Use a flat head screwdriver to pry the corner edge loose. Pry toward the fireplace and then press down and out. Figure
4.15
Remove 2 screws & pry open door
Figure 4.12
Remove 2 screws in cover plate
Figure 4.13
Figure 4.14
Pry pointed edge toward fireplace and then down and out to remove.
Cover Plate
Figure 4.15
4/20/11 | Heatilator • Constitution EPA Fireplace • | Page 27 |