Heatiator C40 owner manual Fan Replacement Instructions, Removing the fan

Fan Replacement Instructions

1.Remove the brick from the bottom of the fireplace and 3 of the back vertical bricks.

2.Remove the 2 screws from the access panel in the fire- box floor. See Figure 4.8.

3.Pry up the access panel using the screwdriver slot and completely remove the panel.

Removing the fan

1.Unplug the wire harness.

2.Lift fan from locating pins and remove. Repeat for second fan if necessary. See Figure 4.9.

3.Connect new fan wires to wire harness.

4. Before installing the fan, make sure the grommets are	Figure 4.10 Installing Fans
tightly in place. Insert the right fan and place over the
2 locating pins. Repeat for other fan. Figure 4.10

5.Re-install bottom panel or firebox access panel in reverse order as described above.

6Replace the brick that was removed.

7. Reconnect the power.

	Screws
	Screwdriver Slot
Figure 4.8	Accessing Fan Motor

Unplug wire harness before removing fan

Remove nut

and lift out fan

Figure 4.9 Fan Motor

Page 26 Heatilator • Constitution EPA Fireplace • 480-1091D 4/20/11