F. Tools and Supplies Needed
Before beginning the installation be sure the following tools and building supplies are available:
Reciprocating saw | Framing material |
Pliers | |
Hammer | Gloves |
Phillips screwdriver | Framing square |
Flat blade screwdriver | Electric drill and bits |
Plumb line | Safety glasses |
Level | Tape measure |
G. Fireplace System Requirements
The Heatilator fireplace system consists of the following:
•Fireplace
•Firebrick
•Chimney termination cap
•Chimney system
•Hearth extension
•Outside air
Required components include:
•Chimney Air Kit (with SL 300 Series Pipe)
Optional components include:
•Firescreen
•Lintel Bar
•Heat Zone Kit
•Top Vent Kit
H. Inspect Fireplace and Components
Warning! Risk of Fire and/or Explosion! Damaged parts could impair safe operation. Do NOT install dam- aged, incomplete or substitute components. Keep fire- place dry.
•Remove fireplace and components from packaging and inspect for damage.
•Vent system components and doors are shipped in separate packages.
•Report to your dealer any parts damaged in shipment.
•Read all the instructions before starting the installation. Follow these instructions carefully during the installation to ensure maximum safety and benefit.
Page 34 | Heatilator • Constitution EPA Fireplace • | 4/20/11 |