Heatiator CD4842IR-C, CD4236ILR-C, CD4236IR-C LOG Placement Instructions, Install the Log Assembly

	G. Install the Log Assembly	LOG PLACEMENT INSTRUCTIONS
Log Set Assembly: LOGS-4236, LOGS-4842
Models: CNXT4236IT-C, CNXT4842IT-C,
	CNXT4236IH-C, CNXT4842IH-C
	CD4236IR-C, CD4842IR-C

CAUTION: Logs are fragile, handle with care.

Log A: SRV2208-702

Log B: SRV2208-703

Log C: SRV2208-704

Log D: SRV2208-073 (4236 models) SRV2211-073 (4842 models)

D

A

CB

1.Base logs have been permanently mounted on the grate assembly. Do not attempt to remove or relocate the logs. See Figure 1.

2.Be sure the left end of log A is not covering ports. Slide the left end of log A back if it’s covering ports. See Figure 2.

3.Left log placement (SRV2208-705) : Mate rear and front faces of left log with indentations on rear and base logs as shown in Figure 2 and Figure 3. Slide the left log back.

4.Right log placement (SRV2208-706) : Place the right log by positioning the front “V” of the log on the indentation on the base log and resting the rear of the log on the flat area of the rear log. See Figure 2 and Figure 4.

5.Figure 4 shows the Left and Right Logs properly placed. Both Left and Right Logs should sit securely on the rear and corresponding base logs.

Figure 1. Base Logs

REAR LOG D

LOG A

SHOULD NOT

A COVER ANY

PORTS

BASE LOG C B

LEFT LOG RIGHT LOG

REAR FACE

FRONT “V”

FRONT FACE

FLAT

AREA

REAR LOG

BASE LOG

Figure 2. Left Log and Right Log Reference Points

Figure 3. Left Log in Proper Position	Figure 4. Left and Right Log in Proper Position
Heatilator	• CD4236IR-C, CD4842IR-C • 2207-900 Rev. J • 11/11	55