9 Appliance Preparation
A. Top Vent
CAUTION! Risk of Cuts, Abrasions or Flying Debris. Wear protective gloves and safety glasses during instal- lation. Sheet metal edges are sharp.
NOTICE: Once appliance is set up for top or rear venting, it CANNOT be changed at a later time.
NOTICE: Once the seal cap has been removed it CANNOT be reattached.
Figure 9.1 Cut the seal cap strap across the rectangles next to the disk. For rear vent, skip this step.
Figure 9.4 Remove the insulation basket and white insu- lation from the center vent pipe.
Figure 9.2 Remove the white gasket material covering the seal cap.
Figure 9.5 Remove the insulation from the outer vent pipe. For rear venting there is no insulation in the outer vent pipe.
Figure 9.3 Remove the seal cap.
40 | Heatilator • |
