Heatiator NNXT3933IL  B. Vent Components Diagrams continued, 203 mm, 101 mm, 3-13/16 in, 97 mm

B. Vent Components Diagrams (continued)

Note: Heat shields MUST overlap by a minimum of 1-1/2 in. (38 mm). The heat shield is designed to be used on a wall 4 in. to 7-1/4 in. (102 mm to 184 mm) thick. If wall thickness is less than 4 in. (102 mm) the existing heat shields must be field trimmed. If wall thickness is greater than 7-1/4 in. (184 mm) a DVP-HSM-B will be required.

	8 in.
	(203 mm)
	Heat
	Shield
15-1/8 in.
(384 mm)
		Term Cap	Minimum	Maximum
			Effective Length	Effective Length
	Max
12 in.		Trap1	3-1/8 in.	4-3/4 in.
	Effective		79 mm	121 mm
(305 mm)	Length
			5-1/4 in.	9-1/4 in.
	SLP-TRAP	Trap2
			133 mm	235 mm
Horizontal Termination Cap
6-11/16 in.	3-15/16 in.
(169 mm)	(101 mm)
3-15/16 in.	3-13/16 in.
(101 mm)	(97 mm)
8 in.	5-1/16 in.		8-1/8 in.	13 in.
	(128 mm)
(203 mm)			(206 mm)	(330 mm)
SL-2DVP
Adapter
	15 in.
	(381 mm)
26 in.
660 mm

DVP-HSM-B			SLP-HRC-SS
Extended Heat Shield
	Effective Length	5-1/2 in.	8-3/8 in.
	5-3/4 to 8-3/8 in.
	146 to 213 mm	140 mm	213 mm
14-7/16 in.		87°	3°
367 mm
			10-1/2 in.
			267 mm
14-7/16 in.	2-5/16 in.		10-7/8 in.
			276 mm
	59 mm
367 mm
SLP-WT-BK
Wall Thimble-Black			SLP-HRC-ZC-SS
Figure 17.8 SLP Series Vent Components
Heatilator • Novus NNXT • 4055-879		• Rev. o •	2/12	75