B. Rear Vent
NOTICE: Once appliance is set up for top or rear venting, | • Discard the vent cap, remove and discard the insulation |
it CANNOT be changed at a later time. | basket. |
•Fold the tabs toward the center of the vent cap (90º) and remove the insulation gasket.
Figure 9.6
•Cut the metal retaining band and fold the sides out.
Figure 9.7
•Fold the center parts of the retaining band out and use to remove the vent cap.
Figure 9.9
•Attach the first vent section (it will snap into place). Slide the insulation gasket onto the vent section, up against the appliance and over the tabs.
Figure 9.10
Figure 9.8
Heatilator • Novus NNXT • | 39 |
