Henny Penny CMC/CMR-103, CMC/CMR-106 manual Cold Top On A Cold Base Installation Instructions

2-11. COLD TOP ON A COLD BASE INSTALLATION INSTRUCTIONS

Figure 2-1

Model CMC/CMR-103,104,105,106,107

1.Remove bolts securing the Cold Top to the skid, and save bolts for later use.

2.Carefully set Cold Top on top of the Cold Base.

Take care when moving the fryer to prevent personal injury or damage to the refrigeration system. The CMC-107s weigh over 700 lbs. (318 kg).

3.Line up the 2 front holes and secure the top to the base using the bolts from step 1. Figure 2-1.

4.Locate mounting hole in right, rear corner of the units and se- cure the corner using one of the bolts from step 1. Figure 2-2.

Figure 2-2

5.Pull the control panel out from unit and locate the mounting hole in the left, rear corner. Secure corner with one of the screws from step 1. Figure 2-3.

Figure 2-3	6. Installation is now complete.
403	2-7