Henny Penny CMC/CMR-104 UL Specs, CE Specs, Location, Refrigerant, Information, Drain Connection

				Model CMC/CMR-103,104,105,106,107
2-4.	LOCATION	Place the cold tops in an area where product can be loaded and
		unloaded without interruption. For proper operation, level the unit
		by adjusting the bolts under the base, and leave 3 feet (91.44 cm)
		clearance behind the unit for ventilation and service.
		For maximum efficiency, units should be operated in an air-condi-
		tioned environment, with maximum air temperature of 75° F
		(24° C), and 55% relative humidity.
			Wait at least 4 hours before plugging the unit into an
			electrical supply. The gases and oils in the refrigeration
			system needs to settle before operating the compressor, or
			damage to the compressor could result.
2-5.	REFRIGERANT	Refrigerant Type		Amount of Refrig.	Design Pressure
	INFORMATION				High	Low
		CMC-103	R22	1.5 lbs (0.680 kg)	440psig	162 psig
					(30.3 bar)	(11.2 bar)
		CMC-104	R22	1.5 lbs (0.680 kg)	440psig	162 psig
	UL Specs				(30.3 bar)	(11.2 bar)
		CMC-105	R22	2.5 lbs (1.134 kg)	440psig	162 psig
					(30.3 bar)	(11.2 bar)
		CMC-106	R22	2.5 lbs (1.134 kg)	440psig	162 psig
					(30.3 bar)	(11.2 bar)
		CMC-107	R22	2.5 lbs (1.134 kg)	440psig	162 psig
					(30.3 bar)	(11.2 bar)
		CMC-103	R134A	1.65 lbs (0.750 kg)	440psig	162 psig
					(30.3 bar)	(11.2 bar)
		CMC-104	R134A	1.87 lbs (0.850 kg)	440psig	162 psig
	CE Specs				(30.3 bar)	(11.2 bar)
		CMC-105	R134A	2.65 lbs (1.200 kg)	440psig	162 psig
					(30.3 bar)	(11.2 bar)
		CMC-106	R134A	3.09 lbs (1.400 kg)	440psig	162 psig
					(30.3 bar)	(11.2 bar)
		CMC-107	R134A	3.53 lbs (1.600 kg)	440psig	162 psig
					(30.3 bar)	(11.2 bar)
2-6.	DRAIN CONNECTION
		The cold tops-remote (CMRs), requires 1-1/2 inch (38.1 mm)
		drain connection. CMCs do not require a plumbed drain.
303						2-3