High End Systems Pixelation Luminaire user manual Quick Start with a Wholehog Console

CHAPTER 4

DMX Programming Basics and Quick Start

Quick Start with a Wholehog Console

After Setting up and Configuring the SHOWPIX or StudioPix fixture as outlined in Chapter 2, use the following steps to get to the point of displaying output.

Step 1: In the Fixture Schedule window of Wholehog software, Add one Standard and two Image “fixtures” for each unit.

Step 2: Assign user numbers for these items. Set up user numbers 1-3 that correspond to SHOWPIX or StudioPix unit number 1, where user number 1 is the Standard, 2 and 3 are Image fixture types. Patch the Standard first and then the two Image fixture types.

32 StudioPix™ Pixelation Luminaire User Manual