CHAPTER 9
Image Graphics Control
Effect Function
The Image Effect Function parameter provides effects that can be applied to the media file in an image layer.
DMX | Name | Description | Adjustments | ||
Value | Modifier 1 | Modifier 2 | |||
|
| ||||
|
|
|
|
| |
0 | None | No effects selected | NA | NA | |
|
|
|
|
| |
1 | Strobe | Periodic strobing of the image | Rate | Not Used | |
|
|
|
|
| |
2 | Pan and Tilt sync | Synchronizes image movement with Pan and Tilt | Rate | Size | |
movement | |||||
|
|
|
| ||
|
|
|
|
| |
3 | Shake | Shakes the current visible image along the x and/or y | Horizontal | Vertical | |
axis | |||||
|
|
|
| ||
|
|
|
|
| |
4 | Bar Scan | Blacks out a portion of the image and creates a visible | Rate | Size | |
“bar” that scans across the LED array | |||||
|
|
|
| ||
|
|
|
|
| |
5 | Target Scan | Blacks out a portion of the image and creates a visible | Rate | Size | |
“target” that scans across the LED array | |||||
|
|
|
| ||
|
|
|
|
| |
|
| Blacks out a portion of the image and creates a |
|
| |
6 | Curtain Scan | “curtain” pattern (two parallel bars) that scans across | Rate | Size | |
|
| the LED array |
|
| |
|
|
|
|
| |
7 | Mirror | Mirror the visible image on the X and/or Y axis | Horizontal | Vertical | |
|
|
|
|
| |
8 | Brightness and | Adjusts the brightness and/or contrast of the visible | Brightness | Contrast | |
Contrast | image | ||||
|
|
| |||
|
|
|
|
| |
9 | Filters | Enables the rainbow color effect to flow through the | Selects | Rate | |
image in a predetermined order of the LEDs | Filter | ||||
|
|
| |||
|
|
|
|
| |
10 | Flip | Flips the visible image on the X and/or Y axis | Horizontal | Vertical | |
|
|
|
|
| |
Pixel Mapping
When using Enhanced mode protocol, RGB pixels can be “inserted” in place of an image file within the graphics engine. This provides the ability to fully utilize the graphic engine features when pixel mapping the LEDs.
SHOWPIX fixtures have 127 LEDs that can be mapped and StudioPix has 61. To enable the pixel mapping input, select Folder 255 File 1. The resulting image from the appropriate DMX channels for the pixel mapping will be routed into the graphics engine and behave the same as internal content.
Note: The transparent color and several color effects require image files to function and will not function with pixel mapped input.
StudioPix™ Pixelation Luminaire User Manual | 65 |
