Chapter 3

The Menu System

You can use the fixture’s onboard menu system to configure and test the StudioPix fixture.

The onboard StudioPix menu system allows you to:

Assign a DMX start channel.

Access fixture options such as homing the fixture, viewing fixture status, and performing self tests.

View all DMX values on the link.

Navigating the Menu System

Access the menu system via the four menu navigation buttons on the fixture’s front panel.

The alphanumeric LED display shows the menu items you select from the menu map. When accessing fixture options, the display will flash when a new option is selected (by pressing the <Up> or <Down> arrow buttons) and stops flashing when a new option is stored (by pressing the <Enter> button).

Use <UP> and <Down> arrow buttons to scroll through menus

and options

Use the <Enter> button to select and store a menu or option

Use the <Menu> button to access the menu and return to previous menu or option

To access the menu system: press and hold the <Menu> button until AddR appears on the display. The menu system is protected against inadvertent menu changes by requiring the <Menu> button to be held for a few seconds before allowing entry to the menu system.

To return to the previous option or menu without changing the value: press the

<Menu> button.

StudioPix™ Pixelation Luminaire User Manual

15

Page 29
Image 29
High End Systems Pixelation Luminaire user manual Chapter Menu System, Navigating the Menu System