FUNCTION
Power Swivel
SWIVEL
With the optional Desktop stand, you can adjust the angle of the panel side to side by pressing 
button on the remote control.
ENGLISH
SWIVEL
1.Press 
button on the remote control.
The Swivel Display (as shown in the fi gure on the right) will appear on the screen.
2.Adjust the angle of the panel with ◄ ►keys while Swivel Display is on the screen.
The monitor will be able to move ±30 degrees to each side.
CAUTION
When you use the Power Swivel function, make sure that the Power Cord, cord or chain connected to the wall is loose enough to operate the Swivel function securely.
Do not put hands or faces near the unit while operating the Swivel. It could cause personal injury. Beware especially when small children are around the unit.
SWIVEL 
button
Swivel
The Swivel Display
NOTE | Slack |
|
If the stand cable is not connected to the unit, the message “Not Available” |
|
will appear on the screen. | 30° |
The Swivel Display will automatically disappear when no operation has | 30° |
| |
been made for about 6 seconds. |
|
CAUTION
Do not push the panel with your hands while operating the Swivel. It could damage the panel and/or stand.
Do not allow children to play or hang on the TV. These actions may tip it over, causing personal injury.
Do not swing the monitor back and forth.
Do not place any fragile objects around the unit. The monitor would hit the object(s) during the Swivel operation and could cause the breakage of the objects and/or the stand.
To operate the Swivel function correctly, place the monitor on the stable surface.
When you use the unit as
Information
About Swivel terminal connection
To connect the Desktop stand to the unit Connect the designated stand cable to the Swivel terminal on the rear side of
the unit.
To disconnect the stand from the unit.
Before detach the stand from the unit, make sure to disconnect the stand cable
from the Swivel terminal on the rear side of the unit.
CAUTION
When you install the Desktop stand, follow the Instructions of the Manual included with the stand.
Turn Off the Main Power of the unit when connecting or disconnecting the stand cable to the unit.
36
