PC ON SCREEN DISPLAY
4.Other signal formats may not be displayed correctly. Use AUTO ADJUST to automatically adjust the horizontal position, vertical position, clock, and phase. We recommend you use signal, which has more than 50% of amplitude of white area at each corner of the picture, execute Auto adjustment. It may not work correctly with dark picture. (See page
5.Input signal level.
SYNC | TTL level H/V separate signal |
RGB | 0.7Vpp |
|
|
NOTE: Interlaced signal is not available.
6.PC picture will not appear at all when receiving a signal which is not supported by this product. If PC display setting is wrong, the monitor will display:
PC:1
NO SYNC. SIGNAL
PC:1
INVALID SCAN FREQ.
Without sync | Either horizontal or vertical |
| frequency is inappropriate. |
NOTE: 1. If PC cannot display an input signal, please try AUTO ADJUST to display the signal. This is to initialize the MultiScan Converter.
2.If PC is set to correct horizontal and vertical frequencies and the picture is out of sync or scrambled, check the video card documentation and set up software to properly set the monitor.
70
