Hitachi 55DMX01WD specifications Spare Lamp Retaining Screws Lamp Unit Retaining Screws

LAMP REPLACEMENT

5.Remove the two screws securing the spare lamp unit. Remove the spare lamp unit. Replace the spare lamp cover.

6.Replace the lamp.

•Push the lamp unit back to its original position.

•Tighten the scres firmly on the lamp unit. If they are loose, the TV may not operate correctly.

Spare Lamp

Retaining Screws

Lamp Unit Retaining Screws

7.Reinstall the lamp cover by re-engaging the two clips and installing the screw removed in Step 2. Be sure to install the lamp cover securely and tighten the screw before turning the power on, otherwise it may cause unusual colors.

Two Clips

Lamp Cover Retaining Screw

CAUTION: IF POWER IS CONNECTED BEFORE THE LAMP COVER IS INSTALLED, THE POWER WILL BE OFF AND THE LAMP INDICATOR WILL FLASH (See page 7).

8.Plug power cord into AC outlet and turn on the main power switch.

120V

PUSH

NOTES: 1. After installing the new lamp, don’t forget to reset the LAMP TIME COUNTER. (see page 48)

2.The old lamp must be disposed of properly. For assistance, please call 1-800-HITACHI.

82