Techno Tidbits & Problem-solving

Troubleshooting

Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used. If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest PIONEER authorized service center or your dealer to carry out repair work.

Symptom

Cause

Remedy

The power does not turn ON.

•The power plug is disconnected.

•The protection circuit may have been activated.

•Connect the power plug to the wall outlet.

•Disconnect the power plug from the outlet, and insert again.

The unit does not respond when the buttons are pressed.

• Static electricity caused by dry air.

•Disconnect the power plug from the outlet, and insert again.

No sound is output when a function

•

Improper connections.

• Make sure the component is

is selected.

•

Sound is muted.

connected correctly (see p. 8-15).

 

• Press MUTE on the remote control.

 

• The volume is turned down.

• Adjust MASTER VOLUME.

 

• The TAPE 2 MONITOR is ON.

• Press the TAPE 2 MONITOR button.

 

• Speakers are turned OFF.

• Press SPEAKERS (A/B) to select the

 

 

 

speakers you connected.

 

• DIGITAL/ANALOG switch is set

• Set SIGNAL SELECT (see p. 38)

 

 

incorrectly.

 

No image is output when a function

•

Improper connections.

• Make sure the component is

is selected.

 

 

connected correctly (see p.9).

 

• The input source is not properly

• Press the correct function button.

 

 

selected.

 

 

 

 

 

Considerable noise in radio

•

Incorrect frequency.

broadcasts.

• The antenna is not connected.

 

•

AC-3 RF and/or digital cables are

 

 

near the antenna terminals and

 

 

wires.

•Tune in the correct frequency.

•Connect the antenna (see p.12).

•Route AC-3 RF and digital cables away from the antenna terminals and wires.

FM broadcasts

•The FM antenna is not fully extended or is poorly positioned.

•Weak radio signals.

•Fully extend the FM wire antenna, position for best reception, and secure to a wall.

•Connect an outdoor FM antenna (see p.12).

AM broadcasts

•The AM antenna is poorly positioned.

•Weak radio signals.

•Interference caused by other equipment (fluorescent lamp, motor, etc.).

•Adjust the direction and position for best reception.

•Connect an additional internal or external AM antenna (see p.12).

•Turn off the equipment causing the noise or move it away from the receiver.

•Place the antenna farther away from the equipment causing the noise.

Broadcast stations cannot be selected

• Weak radio signals.

• Connect an outdoor antenna (see

 

p.12).

automatically.

 

 

 

Sub woofer output is very low

• Settings route signal away from

• To get more signal to the sub

Sub woofer

woofer set it to PLUS or choose

 

 

 

SMALL for the FRONT speakers

 

 

(see p.24-25).

72

Page 71 Page 73
Page 72
Image 72
Pioneer VSX-29TX manual Troubleshooting, Symptom Cause Remedy, FM broadcasts, AM broadcasts
Page 71 Page 73

VSX-29TX specifications

The Pioneer VSX-29TX is a highly regarded audio-video receiver that combines advanced technology and robust performance, making it a popular choice among enthusiasts seeking immersive home theater experiences. Released as part of Pioneer's esteemed VSX series, this receiver is designed to deliver exceptional sound quality and versatility for all forms of media.

At the heart of the VSX-29TX is its powerful amplification system, which provides a robust output, ensuring that even the most demanding audio tracks are handled with ease. The receiver boasts a high current capability that allows it to drive larger speakers while maintaining clarity and precision. Thanks to its multi-channel processing, it can support various configurations, including 5.1 and 7.1 surround sound setups, enhancing the auditory experience for movies, music, and games.

One of the standout features of the VSX-29TX is its advanced surround sound processing technology. It incorporates Dolby Digital and DTS decoding, allowing for the playback of high-quality audio formats. The receiver also supports various sound modes that can be easily tailored to the specific content being enjoyed. Whether you're watching an action-packed film or listening to classical music, the VSX-29TX ensures that the audio is both dynamic and engaging.

Connectivity is a crucial aspect of any receiver, and the VSX-29TX excels in this area, featuring multiple inputs and outputs that cater to a wide range of devices. With several HDMI ports, digital optical and coaxial inputs, and analog connections, users can easily connect their Blu-ray players, gaming consoles, and streaming devices. This extensive compatibility allows for a seamless integration of various audio-visual components.

Additionally, the VSX-29TX is equipped with Pioneer's proprietary technologies, including the MCACC (Multi-Channel Acoustic Calibration System). This system automates the calibration of speaker settings by analyzing the room's acoustics, resulting in an optimized listening environment. This feature minimizes the hassle of manual configuration and provides an enhanced audio experience tailored to the unique characteristics of your space.

In terms of durability and design, the receiver sports a sturdy build with a sleek aesthetic, making it an attractive addition to any home entertainment setup. Its user-friendly interface and remote control allow for easy navigation through settings and inputs, ensuring that users can enjoy their favorite media without complications.

In summary, the Pioneer VSX-29TX is a versatile and powerful AV receiver that stands out for its advanced surround sound capabilities, robust amplification, and comprehensive connectivity options. With features like MCACC for room calibration, it truly elevates the home theater experience, making it a solid choice for audio enthusiasts and casual viewers alike. Its combination of technology, performance, and user-friendly design solidifies its place in the competitive landscape of home audio solutions.
Top Page Image Contents