![](/images/new-backgrounds/1022524/2252453x1.webp)
Initial Set Up
CHANNEL LEVEL
The following steps show you how to balance the sound output level of your speakers. Proper speaker balance is essential for obtaining high quality surround sound. If continuing from CHANNEL DELAY go to step 1. If starting fresh, complete steps
1
System Setup | EXIT | |
SPEAKER | BASS PEAK LEVEL | |
SETTING | MANAGER | |
CHANNEL DELAY | DYNAMIC RANGE | |
CONTROL | ||
| ||
CHANNEL LEVEL | DIGITAL INPUT | |
SELECT | ||
| ||
CROSSOVER | MULTI ROOM | |
NETWORK | ||
|
1 Press the CHANNEL LEVEL button.
The CHANNEL LEVEL settings will appear on your remote control screen.
2 Select a test tone mode by pressing one of the TEST TONE buttons. Output the TEST TONE.
SIGNAL | STEREO |
| VOLUME |
|
| |||
|
| |||||||
SELECT | A |
|
|
|
| |||
|
|
| SP |
|
|
|
| |
ANALOG |
| dB | ||||||
|
|
|
|
|
| |||
AUTO |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
Channel Level
AUTO
TEST TONE
MANUAL
TEST TONE
SETUP
OK
| AUTO (automatic TEST TONE) |
|
|
|
|
|
|
| ||||||
2 | This mode switches the test tone between each speaker automatically. | |||||||||||||
The automatic test tone is output in the following order : | ||||||||||||||
|
|
| FL |
|
|
| CT |
|
|
| FR |
|
| |
|
|
|
|
|
|
|
|
|
| |||||
|
|
| SW |
|
|
| SL |
|
|
| SR |
|
| |
|
|
|
|
|
|
|
|
|
|
|
MANUAL (manual TEST TONE)
This mode lets you switch the test tone between each speaker manually.
NOTE : Be prepared! The test tone is output at a high volume level. MASTER VOLUME rotates to the reference position (0 dB) and the display on the receiver flashes TEST TONE. After a few seconds the test tone is output.
These settings will be displayed on your TV.
SET UP
FL | 0 dB | CT 0 dB | FR | 0 dB |
SL | 0 dB | SW 0 dB | SR | 0 dB |
Any time you want to exit the process
Press SETUP OK.
memo • Be careful, if you touch one of the speaker buttons by accident the TEST TONE will automatically sound from each speaker.
•If your sub woofer has a volume control, set it to the middle position before doing these operations.
27