Display

Displays & Controls

All the display information is explained and /or referenced here.

2 3 4 5 6 7 8 9 0

SIGNAL

ATT

LOUDNESS

MIDNIGHT

DSP

STEREO

SELECT

OVER

H.P

SP AB

ANALOG

DIGITAL

MONO STEREO

AC-3RF

AUTO

TUNED AMFM

PRO LOGIC

DIGITAL

VOLUME

TAPE 2

AC-3DTS

LFE

@ !

1 SIGNAL SELECT indicators

8 STEREO indicator (See p.35-36)

Light to indicate the type of input signal selected for

Lights when a STEREO mode is selected.

the current component (see “Front Panel“, %,

9 Radio Frequency/Function indicator

SIGNAL SELECT).

Displays the function or the frequency of the current

ANALOG : Lights when analog signals are assigned.

radio station.

DIGITAL : Lights when digital audio signals are

Surround/dts mode indicators

selected. (DVD/LD, CD, MD/TAPE 1, TV/SAT, VCR 1,

DIGITAL : When the

Surround/dts mode on the

VCR 2)

receiver is on, this indicator lights to indicate

AC-3 RF : Lights when AC-3 RF signals are assigned.

playback of a Dolby Digital signal. However,

PRO

(DVD/LD, TV/SAT, VCR 1, VCR 2)

LOGIC lights during 2 channel playback of Dolby

AUTO : Lights when the receiver is set to select the

Digital.

input signal automatically. (DVD/LD, CD, MD/TAPE 1,

PRO LOGIC : When the

Surround/dts mode on

TV/SAT, VCR 1, VCR 2)

the receiver is on, this indicator lights during 2

AC-3 :Lights when a source with Dolby Digital signals

channel playback. ( Both B or A+B speaker systems

is played.

turn off automatically when headphones are

DTS : Lights when a source with DTS audio signals is

plugged.)

played.

DTS : Lights when DTS signals are input.

2 Speaker indicators

HOME THX CINEMA : Lights when the HOME THX

Light to indicate the current speaker system (see

CINEMA mode is selected.

“Front Panel“, £, SPEAKERS (A/B)).

- MASTER VOLUME indication

SP # A : Lights when speaker system A is selected.

Displays current level of master volume.

SP # B : Lights when speaker system B is selected.

= TAPE 2 indicator

SP # AB : Lights when speaker systems A & B are

selected.

Lights when the TAPE 2 monitor is on.

3 Analog level indicators

~ Character display

OVER : If “ANALOG” is selected in SIGNAL SELECT,

Displays sound modes, general information, etc.

this indicator lights to show that an excessively

! Tuner indicators

strong signal is being processed. When this occurs,

MONO : Lights when the tuner is set to receive FM

press INPUT ATT on the front panel to attenuate

broadcasts and when selected MPX mode.

(lower) the signal. Also, when “DIGITAL” is selected

STEREO : Lights when a FM stereo broadcast is

in SIGNAL SELECT, this indicator lights to show that a

received in the auto stereo mode.

source containing an excessive amount of

TUNED : Lights when a broadcast is received.

information is being processed. If this occurs, see p.

AM/FM : Light to indicate the current band (FM or

36.

ATT : Lights when INPUT ATT is used to reduce the

AM).

level of the input signal (available in ANALOG mode

@ LFE indicator

only).

LFE (Low Frequency Effects) indicator lights to

4 LOUDNESS indicator (See p.41)

indicate that the program source contains an LFE

Lights when the LOUDNESS mode is on.

channel. The indicator under the LFE lights during

5 H.P (headphones)

actual playback of the LFE signals (LFE signals are not

Lights when headphones are connected to the

present in all parts of the soundtrack).

# Program Format indicator

PHONES jack (speakers A and B turn off

When a Dolby Digital or DTS signal is input, he

automatically).

6 MIDNIGHT indicator (See p.40)

following indicators light to show the channels being

Lights when the MIDNIGHT LISTENING mode is on.

played back.

L : Left front*1*2, C : Center*1, R : Right front*1*2,

7 DSP indicator (See p.35-36)

LS : Left surround*1,S : Surround (mono)*2,

Light when a DSP or Advanced Theater mode is

RS : Right surround*1