Pioneer VSX-29TX Press Crossover Network Choose a crossover frequency, 80 Hz, 100 Hz, 150 Hz

Initial Set Up

CROSSOVER NETWORK

The following steps show you how to adjust the crossover network. The crossover network is the frequency at which the system divides the signal and sends the different parts (high ,mid, low) to different speakers. Speaking precisely, this setting sets the cutoff point for the bass frequencies rerouted from your SMALL speakers to your sub woofer or speaker set to LARGE. If continuing from CHANNEL LEVEL go to step 1. If starting fresh, complete steps 1-3 in “Setting Up for Surround Sound“ (p.23) first.

1

System Setup	EXIT
SPEAKER	BASS PEAK LEVEL
SETTING	MANAGER
CHANNEL DELAY	DYNAMIC RANGE
	CONTROL
CHANNEL LEVEL	DIGITAL INPUT
	SELECT
CROSSOVER	MULTI ROOM
NETWORK

1 Press CROSSOVER NETWORK .

2 Choose a crossover frequency.

Setting speakers to SMALL in SPEAKER SETTING sends the respective channel's bass frequencies to the sub woofer or the speakers you have selected as LARGE. This function lets you determine which frequencies will be sent to the sub woofer or LARGE speakers. Press 80 Hz,

100 Hz, or 150 Hz. The default setting is 80Hz.

80 Hz

					Sends bass frequencies below 80 Hz to the sub woofer (or LARGE
					speakers).
					100 Hz
			2		Sends bass frequencies below 100 Hz to the sub woofer (or LARGE
					speakers).
					150 Hz
					Sends bass frequencies below 150 Hz to the sub woofer (or LARGE
Crossover Network
					speakers).
					As noted on the LCD screen the THX setting is 80. Select this setting if
	SELECT FREQUENCY
	80 Hz	100 Hz	150 Hz		you have THX approved SMALL speakers.
					Experiment with the different settings to see which sounds best to you.
	THX SPEAKER = 80 Hz
			SETUP
					3 Press SETUP OK to return to the SYSTEM SETUP MENU.
				OK
					The display on the receiver reads RECEIVED.
		Ç	3
					If "ERROR" flashes in the display, perform the setup operations from
					the first step again.
Crossover Network
						SIGNAL				VOLUME
						SELECT
								SP A
						ANALOG				dB
	SELECT FREQUENCY
	80 Hz	100 Hz	150 Hz
					This information will be displayed on your TV.
	THX SPEAKER = 80 Hz
			SETUP
				OK			Crossover Network
								Frequency	[100Hz]
								(THX Speaker =100Hz)

Next, proceed to BASS PEAK LEVEL MANAGER below.

If you want to change a setting before proceeding

simply select a new crossover frequency.

SET UP

29