Useful Information
Troubleshooting
No. | Items | Notes | |
1 | Buzzing sound from Plasma | A buzzing sound may be heard when the plasma television is turned on in a very quiet | |
room. This is due to the plasma panel drive circuit when it is functioning. The buzzing | |||
| display panel. | sound is normal and is not a malfunction. | |
|
| ||
2 | Infrared interference | Some infrared rays are emitted from the plasma television panel that might affect the | |
operation of other infrared controlling equipment. | |||
|
| ||
|
| High precision technology is used to manufacture the plasma television. But there | |
3 | Bright and dark spots | maybe points that do not illuminate, points that are too bright, and points with color | |
|
| different from that of the periphery. Please note that this is not a mafunction. | |
4 | Picture Image | In some cases, residual images may remain after the short term display of still images | |
when the picture changes. | |||
|
| ||
| Display panel surface | The plasma display panel display images by means of electrical discharges inside the | |
5 | panel. This may cause the temperature of the panel surface to increase. Please note that | ||
temperature is too high. | |||
| this is not a malfunction. | ||
|
| ||
6 | Plasma Surface | A reinforced glass filter is installed over the plasma panel surface. A strong impact to | |
the front panel risk a danger of glass breakage. | |||
|
| ||
7 |
| Please transport the plasma television in it's packing box and placed in an upright | |
Transportation | position. Do not transport the plasma television in a horizontal position. This increases | ||
|
| the posibility of panel breakage and pixel failure. | |
8 | Granular spots | When a screen is seen at | |
dark areas of the picture. | |||
|
| ||
9 | High temperature | High temperature affect the electric discharge/luminescence characteristic of the PDP | |
environment | panel. Do not place the plasma television in high temperature environments. | ||
| |||
10 | Operation | Operating altitude: 800 to 1,114hPa (6,194ft to | |
to 95˚F. | |||
|
| ||
11 | Storage | Storage altitude: 300 to 1,114hPa (31,912ft to | |
140˚F | |||
|
| ||
12 | Power ON or OFF | Repeatedly turning the plasma television Power ON and OFF at short intervals may | |
result in failure of the television. | |||
|
|
74