English
8. Replacement of Poly-V-Belt
Pulley (A)
Pulley (B)
Fig. 47
The power of the motor is transmitted to the saw blade by a Poly-
When connecting the belt on pulleys, first connect 2 or 3 teeth of
9. Handle (for transportation and carrying)
Handle for Transportation
Slide
Securing
Knob
For transportation purpose, pull up the handle retracted in the gear case with one hand and hold the base at the left end grip section with the other to carry.
NOTE: Before transporting or carrying, position saw blade against guard and tighten slide securing knob to stop slide motion.
Guard
BaseBlade
Fig. 48
10. Lubrication
Lubricate the following sliding surfaces once a month to keep the power tool in good operating condition for a long time (see Fig. 1 and Fig. 2). Use of machine oil is recommended.
Oil supply points:
*Rotary portion of hinge *Rotary portion of vise assembly
*Sliding portion of slide pipe (A) and slide pipe (B)
11. Cleaning
Periodically remove chips, dust and other waste material from the surface of the power tool, especially from the inside of the safety cover with a damp, soapy cloth. To avoid a malfunction of the motor, protect it from contact with oil or water.
SERVICE AND REPAIRS
All quality power tools will eventually require servicing or replacement of parts because of wear from normal use.To assure that only authorized replacement parts will be used and that the double insulation system will be protected, all service (other than routine maintenance) must be performed by an
AUTHORIZED HITACHI POWER TOOL REPAIR CENTER ONLY.
NOTE: Specifications are subject to change without any obligation on the part of HITACHI.
26
