![](/images/new-backgrounds/1176197/17619725x1.webp)
Basic operations
To project
1
2
5 7 4 2
5
3
VIDEO RGB
LASER
STANDBY/ON POSITION
RESET
MENU
FREEZE
MAGNIFY VOLUME
OFF
P in P | MUTE |
BLANK AUTO TIMER
FOCUSZOOM
7
4
1 | Turn on the main power switch of the projector [ I: ON]. |
• The Power indicator lights orange. | |
|
|
2 | Press the STANDBY / ON button. |
• The Power indicator will blink green and then light green. |
• The green blinking indicates warmup.
3 | Remove the lens cap. |
|
| |
4 | Use the ZOOM button to adjust the screen size. |
|
| |
|
|
|
|
|
5 | Use the FOCUS button to adjust the focus. |
|
|
|
|
|
| ||
| (1) The display shown to the right will appear when the FOCUS button is pressed. |
| +++FOCUS+++ |
|
| (2) Use the FOCUS button to adjust the focus until the image is sharp. |
|
|
|
| (3) The message “Focus” will disappear if any other button is pressed. |
|
|
|
|
|
|
| |
| • (When there is no input signal, the Focus characters are not displayed when the input signal is outside the sync range.) |
6 | Turn on the power to the connected equipment. |
Refer to page 31 concerning the connection of other equipment. |
7 Press either the INPUT button of the projector or the VIDEO/RGB button of the remote control to select the signal to be projected on the screen.
Example
RGB 1
The selected signal input channel will be displayed in the lower right part of the screen.
13