OTHER FEATURES (continued)
DVD Player/STB Selection (continued)
Set up hint |
|
|
| |
Example) HITACHI DVD |
|
| ||
To operate HITACHI DVD player, press and hold the | button, | |||
followed by the | button. |
|
| |
1. | Set up the maker |
|
| |
| Press button to indicate the DVD LED on the remote control. | |||
| While the DVD LED is flashing, press | and . |
| |
2. | Set up the maker type |
|
| |
| Release the | button while keeping | button depressed. | |
| Then, press the | button. |
|
|
3. | Confirm the setting |
|
| |
| After setting the maker and type, press the POWER button on the remote control. | |||
If the DVD does not switch on, repeat step 1 and 2 using other maker types as listed in the chart on 43 .
NOTE
• Not all models of the listed makers can be operated using this remote control.
Signal Check (RGB mode)
Changes in the signal status are displayed on the screen as they arise.
Status | Display |
| Action | |
|
|
|
|
|
When Frequency Display is set to ON, | A guide is displayed for the input |
|
|
|
the input signal is switched or when | terminal and the horizontal and |
|
|
|
the RECALL button is pressed. | vertical sync frequency. |
|
|
|
|
|
|
|
|
|
|
|
|
|
When the sync signal is no longer | • A guide displays No Sync. Signal, | Recheck the personal computer | ||
detected. | and Power Save (for approx. 5 sec.) | power switch status and the | ||
| • When the condition continues where | connection status. | ||
| the sync signal cannot be detected, |
|
|
|
| indicator lamp of power source |
|
|
|
| changes in orange and the mode |
|
|
|
| switches to power save mode. |
|
|
|
|
|
|
|
|
When the input signal does not match | A guide displays Invalid Scan Freq. | Recheck the input signal | ||
the monitor specifications or is in an |
| specifications. 50 ~ 52 | ||
unstable status. |
| |||
|
|
|
|
|
RGB |
! No Sync. Signal
!Invalid Scan. Freq.
44
