Hitachi hitachi lcd monitor user manual Selected characters Setup hint

OPERATING INSTRUCTIONS (continued)

SETUP MENU (TV mode) (continued)

Selected characters		W		X		Setup hint
Auto Tuning
					Select the channel entry method between position setting or direct setting.
					And press the OK button to fix it.
Mode					•	If [Position] is selected, the screen display will be numbers (1~199 and
						AV00).
					•	If [Direct] is selected, the screen display will be C** at the channel 0~99
						and S** at the channel 100~199.
Search					Press the OK button and it starts the auto tuning.
Manual Tuning
Position					Set the position number (1~199 and AV00) or channel number (C**, S**) by
					( + ) ( - ) CHANNEL UP/DOWN button.
Frequency					•	If [Position] has been selected, search the frequency here by pressing
					•	W and X buttons.
						If [Direct] has been selected, this function will be not available (grayed out).
					This is used to input the name of the TV station within 5 letters. After fixing
					the cursor on the first digit, select a letter by T and S SELECT buttons and
Name					move to next digit by X ADJUST button. Press the OK button again after
					finished.
					•	Selectable letters are “0”~`”9”, ”A”~`”Z”, “+”, “–”, ” ”(blank), ”,”(comma) and
						”.”(period).
Sound System					Select the sound system through the 5 different settings.
Color System					Select the color system through the 5 different settings.
Skip					If this is set to On, that position will be skipped while selecting positions by
					CHANNEL UP/DOWN button.
					This is automatically set to On for those non-broadcasting channels.
NR					If this is set to On, it helps to reduce the noise interference visible on the
					screen, especially in the weaker signal reception areas.
Antenna Att					If this is set to On, it helps to reduce the noise inter ference visible on the
					screen in case of strong airwave.
Fine Tuning	Decreasing the frequency data		Increasing the frequency data for		After completing the fine-tuning, press the RETURN button to exit this mode.
	for the main tuner		the main tuner.		•	The variable range is -56 ~ +56.
Sort	(When the Mode in Auto Tuning menu is set to [Direct], this function will be not available (grayed out).)
					Press OK button at a line that is required to change order, then the
(A Line of position List)					characters will change to green. And move it up or down in the list by
					pressing S and T SELECT buttons. And press OK button to complete it.
					Press the RETURN button to exit.
					Select the teletext language, depending on the area utilized, through the 4
Teletext Language					settings; West Europe, East Europe, Cyrillic and Greek/Turkish.
					• Select West Europe when watch in Singapore, Australia, Malaysia, and so
						on.
Auto Off					If this is set to On, the power will be turned off when there is no transmission
					signal and no operation for about 10 minutes in the TV mode.

30