INSTALLATION INSTRUCTIONS
Installation
WARNING
Use one of the special mount units to install this product. A mount of insufficient strength or inadequate design can cause overturning or dropping and result in fire, electrical shock or injury. Please note that our company assumes absolutely no responsibility for personal injuries or property damage caused by use of other mount units or improper installation.
CAUTION | 10cm or more* | ||
|
|
| |
|
|
|
|
•In order to prevent an internal temperature increase, maintain a space of 10cm (4 inches : For a desktop setup) or more between the sides and other objects such as walls, etc., so that the
ventilation holes are not blocked.(*)
Cord or chain
Wall or Pillar
Clamp
Anti-tumble measures
CAUTION
Have this unit mounted in a stable place. Take measures to prevent it from tumbling down to avoid possible physical injury.
Securing to a wall or pillar
Using a commercially available cord, chain and clamp, secure the set to a firm wall or pillar.
Hook Clamp 
Cord or chain
Cord or chain
Wall or Pillar
Securing desktop
(1)Using wood screws (two), fasten the set to the clamping screw holes on the rear of the stand as shown.
(2)Using commercially available wood screws, secure the set firmly in position.
Wood screw
Two places
Read SAFETY INSTRUCTIONS ( 3 to 6 ) carefully to ensure maximum safety before proceeding to these steps:
•Choose an appropriate site and install the product on a level table where the stand is secure.
• Install the monitor to have ready access to a power socket available.
•Make sure that the power switch of this device is turned off.
CAUTION
Loosen a cord or chain enough while operating power swivel to avoid possible troubles.
12
