Hitachi hitachi lcd monitor user manual An example of connecting audio visual devices, Hdmi

INSTALLATION INSTRUCTIONS (continued)

Connection to an Audio Visual Device

(1)Make sure that the power switch of the monitor is turned off.

(2)Make sure that the power switch of the audio visual device is turned off.

(3)Use a commercially available cable and connector to connect the signal input terminal on the rear panel of this device and the signal output terminal of the audio visual device.

	Monitor (rear panel)
Speaker (R)		Speaker (L)

ENGLISH

To audio output terminals Set-Top BoxterminalsoutputcomponentTo To component input terminals

Antenna

Power Cord

HDMI*

To audio output terminals To composite output terminal

input terminals	To component
output terminals	To component	To audio output terminals	To S-video output terminal

To audio output terminals To composite output terminals

To audio input terminals To composite input terminals

DVD Player VTR

Side Input

	To S, audio
Headphone	composite output

DVD Player VTR

VTR

terminal

[An example of connecting audio visual devices]

•If a component input terminal and a composite input terminal of AV1 and AV2 connect to the monitor at the same time, the component input would govern.

•If a video equipment with an S video output terminal is used, cabling by the S video cable is recommended to provide finer video quality. (If an S video input terminal and a video input terminal of AV3 or AV5 (side input) connect to the monitor at the same time, S video input would govern.)

•If the OUTPUT (Monitor) terminal is connected to an external monitor with a 75 Ohm terminal, it is possible to view the same image as on the main unit. But it is possible to monitor only the composite video signal from AV1 ~ AV5 input or the S video signal from AV3 and AV5 that is displayed on the screen at the time.

•Secure connecting cables to the stand with the provided clamps.

HDIM*

•HDMI (High-Definition Multimedia Interface) is a digital interface based on DVI (Digital Visual Interface), which is an added function for audio visual equipment.

-It does not have degradation by transmission since it is digital.

-With only one cable, it is possible to transmit both picture signals and audio signals.

•In case of using analog audio when connecting with DVI-HDMI transformation connector, use analog audio terminal for AV1 input.

13