DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product, to which this declaration relates, is in conformity with the following standards: EN60065, EN55013, EN55020,
Following the provisions of 73/23/EEC, 89/336/EEC and 93/68/EEC directives.
IMPORTANT
The mains lead on this equipment may be supplied with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA or BSI approved BS1362 fuse must be used of the same rating. If the fuse cover is detachable never use the plug with the cover omitted. If a replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug. Fuse covers are available from your dealer.
DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer.
Should it be necessary to change the mains plug, this must be carried out by a competent person, preferably a qualified electrician.
If there is no alternative to cutting off the mains plug, ensure that you dispose of it immediately, having first removed the fuse, to avoid a possible shock hazard by inadvertent connection to the mains supply.
IMPORTANT
As these colour may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows:
The wire coloured WHITE must be connected to the terminal marked with the letter FL. The wire coloured RED must be connected to the terminal marked with the letter FR. The wire coloured GREEN must be connected to the terminal marked with the letter C. The wire coloured BLUE must be connected to the terminal marked with the letter SL. The wire coloured GREY must be connected to the terminal marked with the letter SR.
WARNING:
Mains supply:
This DVD player can be used with a power (mains) voltage of 230V.
The OPERATE button is indicated ” 
”; this button allows you to select operate on or electrical power standby.
Notice:
The OPERATE button is secondarily connected and does not separate the apparatus from the mains supply in the
CONNECTION TO POWER (For the area of Great Britain)
Before Switching on make sure that the voltage of your elec- tricity supply is the same as that indicated on the rating plate.
Mains Cord
This appliance may be fitted with a
It is important that the colour of the replacement fuse cover corresponds with the rating marking on the base of the plug. It the plug has to be changed because it is not suitalble for your socker, or becomes damaged, it should be cut off and an appropriate plug fitted following the wiring instructions below, The plug removed must be disposed of safely as in- sertion into a 13A socket is likely to cause an electrical hazard. For your own safety read the following instructions carefully before attempting to connect this unit to mains.
The wires in this mains lead are coloured in accordance with the following code:
BLUE=NEUTRAL, BROWN=LIVE
Important
As the colours of the wires in the mains lead of the appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. No connection is to be made to the earth terminal of the plug. If a 13 Amp (BS 1363) Plug is used, a 3 Amp Fuse must be fitted, of if any other type of Plug is used a 3 or 5 Amp Fuse must be fitted, either in the Plug or Adaptor, or on the Distribu- tion Board.
Mains Supply: 220 - 240
Do not make any connection to the larger pin marked with the letter "E" or by the symbol 
or coloured green or green and yellow.
2
