SOME DOS AND DON’T ON THE SAFE USE OF YOUR EQUIPMENT

This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.

DO read the operating instructions before you attempt to use the equipment.

DO ensure that all electrical connections(including the mains plug, extension leads and interconnections between pieces of equipment) are properly made and in accordance with the manufacturer`s instructions. Switch off and withdraw the mains plug when making or changing connections.

DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.

DO be careful with glass panels or doors on the equipment.

English

DON T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way-switch off, withdraw the mains plug and consult your dealer.

DON T remove any fixed cover as this may expose dangerous voltages.

DON T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a standby mode. Switch off using the switch on the equipment and make sure that your family knows how to do this. Special arrangements may need to be made for infirm or handicapped people.

DON T use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety. It is illegal to watch television whilst driving a vehicle.

DON T listen to headphones at high volume, as such use can permanently damage your hearing.

DON T obstruct the ventilation openings of the equipment, for example with curtains or soft furnishings. Overheating will cause damage and shorten the life of the equipment.

DON T use makeshift stands and NEVER fix legs with wood screws-to ensure complete safety always fit the manufacturer`s approved stand or legs with the fixings provided according to the instructions.

DON T allow electrical equipment to be exposed to rain or moisture.

ABOVEALL

-NEVER let anyone especially children push anything into holes, slots or any other opening in the case-this could result in a fatal electrical shock;

-NEVER guess or take chances with electrical equipment of any kind. It is better to be safe than sorry !

WARNING

To prevent fire or shock hazard, do not expose the unit to rain or moisture.

To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

Mains cord must only be changed at qualified ser- vice shop.

CLASS 1 LASER PRODUCT

KLASSE 1 LASER PRODUKT

LUOKAN 1 LASER LAITE

KLASS 1 LASER APPARAT

This appliance is classified as a CLASS 1 LASER product.

The CLASS 1 LASER PRODUCT MARKING is located on the rear panel.

This product contains a low power laser device. To ensure continued safety do not remove any cover or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel only.

CAUTION

The use of optical instrument with this product will increase eyes hazard. As the laser beam used in this CD/DVD player is harmful to eyes, do not attempt to disassemble the cabinet.

Refer servicing to qualified personnel only.

The following marking is printed on the rear panel.

This symbol is intended to alert the user of the presence of uninsulated dangerous voltagewithin the products encasement that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user of the presence of important operating and mainte- nance (servicing) instructions in the literature accompanying the appliance.

Welcome!

Thank you for purchasing this DVD Compact AV system. Be- fore operating the unit, please read this operation manual thor- oughly and then keep it for future reference as it will be useful if you have any operation problems in the future.

3

Page 3
Image 3
Hitachi HTD-K160 instruction manual Some DO’S and DON’T on the Safe USE of Your Equipment, Welcome, Aboveall