Manuals / Hitachi / Computer Equipment / Computer Drive

Hitachi HUS103014FL3600 Warranty and Limited Liability, To use this product safely Continued

Models: HUS103073FL3800 HUS103030FL3600 HUS103073FL3600 HUS103036FL3800 HUS103030FL3800 HUS103014FL3800 HUS103014FL3600 HUS103036FL3600

1 43

Download 43 pages 37.05 Kb

Page 5

Warranty and Limited Liability

To use this product safely (Continued)

Caution

0.2.11Protect the drive against shocks with the corrugated board and cushioning material provided by the manufacturer, or with Hitachi Approved containers.

0.2.12When mounting the drive, use the size of screws and the torque recommended in this manual. If non-recommended size of screws and torque are used, it may cause catastrophic failures.

0.2.13Do not press top cover and bottom PCB of the drive. It may cause catastrophic failures.

0.2.14Read and follow all instructions and cautions described on the top cover of the drive, and in the chapter, Precautions for handling, in this manual.

0.2.15In case of fluctuations in the DC power (spikes, momentary shut off, etc.), the data being recorded or to be recorded from buffer memory are not assured.

0.2.16If you find a smoke or a bad smell generating from the product, stop using it, turn the power off, and see your sales contact.

Warranty and Limited Liability

This product is sold with a limited warranty and specific remedies are available to the original purchaser in the event the product fails to conform to the limited warranty. Hitachi GST liability may be further limited in accordance with its sales contact.

In general, Hitachi GST shall not be responsible for product damages caused by natural disasters, fire, static discharge, misuse, abuse, neglect, improper handling or installation, unauthorized repair, alteration, or accident. In no event will Hitachi GST be liable for loss of data stored on product.

Hitachi GST shall not be liable for any special, incidental or consequential damages, even if informed of the possibility thereof in advance.

Please see your sales contact for a complete statement of warranty rights, remedies and limitation of liability.

Drawing No. Sheet No. Revision ６
K6610091	5/43	2005/2/23

Image 5

Hitachi HUS103014FL3600, HUS103036FL3600 specifications Warranty and Limited Liability, To use this product safely Continued

Contents

Hitachi Global Storage Technologies Hard Disk Drive Specifications Ultrastar 10K300 - 300/ 147/ 73SCSI Interface K6610091 Drawing No. Sheet No. Revision2/43 2005/2/23Headline of safety caution General cautions for safetyTo use this product safely Influence for environmentTo use this product safely Continued Safety cautions for this productTo use this product safely Continued Warranty and Limited LiabilityEnvironmental conditions and reliability Other connectors SCSI Bus Connector C1Jumper Socket setting Jumper connector layoutTable 1.1 Models 1 Features2 Standards and Related Documents 3 Description Table 3.1 Characteristics10K300-300 10K300-1473.2 Environmental conditions and reliability Table 3.2 Environmental conditions and reliabilityDrawing No. Sheet No. Revision K6610091Figure 3.1 Vibration test direction Figure 3.2 Shock test direction Table 3.3 Power measurement Operating Table 4.1 DC Power Requirement 4 DC power Interface+5V DC 5.0V +/-5%+12V Current A Fig 4.1 Current transition for +12VTable 4.2 Start and Stop time Manually power on drives at intervals of more than 10 seconds 1. If Disable Auto Start mode is set C39-10 installed4.3.2 Spindle Start Selection receiving the previous drive’s Ready condition orFigure 5.1 Cabling layout WIDE LVD drive 5 Connecting MethodsDrawing No. Sheet No. Revision 5.2 Low voltage differential LVD modeK6610091 19/436 SCSI Interface 9 S.M.A.R.T. Self - Monitoring, Analysis and Reporting Technology 8 Tagged Command Queuing10 Automatic Read Reallocation 11 Write CacheTable 6.1 SCSI Commands Supported Fig. 7.1 Orientations Table 6.1 SCSI Commands Supported Continued7 Mounting and Handling Figure 7.2 Example for mounting HDA upper surface spacer PCB parts side26.1 max Figure 7.3 Layout of Mounting holes147 max Figure 7.4 Temperature Measurement Points Table 7.1 Temperature Limits unit CMaximum temperature Reliability temperature8 Precautions for handling 9 Maintenance 10 Physical interface Table 10.1 Interface connectorsTable 10.3 Interface cable WIDE, LVD mode Table 10.2 Interface cable WIDE, Single-ended modeFigure 10.2 Connector view Figure 10.1 Connector Layout WIDE LVD driveFigure 10.4 Connector view Figure 10.3 Connector Layout SCA-2 LVD drive101.6±0.25 6.35±0.25WIDE, Single-ended mode Table 11.1 Pin assignment of SCSI Bus Connector C111 Pin assignment Table 11.2 Pin assignment of SCSI Bus Connector C1 WIDE, LVD mode SCA-2, Single-ended mode Table 11.3 Pin assignment of SCSI Bus Connector C1Table 11.4 Pin assignment of SCSI Bus Connector C1 SCA-2, LVD mode Figure 11.1 LED Driver Table 11.5 Pin assignment of Auxiliary Connector C4 WIDE LVD drive11.2 Other connectors NW driveFigure 12.1 Jumper connector layout WIDE LVD drive 12 Jumper Socket settingOption Jumper Connector C3 Auxiliary Connector C4The Jumper sockets should be set only when the power is off 12.2 Jumper socket settingOption Jumper Connector C3 Remove all Jumper Sockets DefaultOption Jumper Connector C3 12.2.4 Enable Delayed Start WIDE LVD 12.2.5 SCSI bus Terminator Power WIDE LVD Table 12.1 Jumper socket Table 12.2 Extension connector