Manuals / Hitachi / Computer Equipment / Computer Drive

Hitachi HUS103014FL3800 Pin assignment, 11.1, SCSI Bus Connector C1, 11.2, Other connectors, 12.1

Models: HUS103073FL3800 HUS103030FL3600 HUS103073FL3600 HUS103036FL3800 HUS103030FL3800 HUS103014FL3800 HUS103014FL3600 HUS103036FL3600

1 43

Page 7

11	Pin assignment		33
	11.1	SCSI Bus Connector C1	33
	11.2	Other connectors	37
12	Jumper Socket setting		38
	12.1	Jumper connector layout	38
	12.2	Jumper socket setting	39
	12.3	Jumper socket part number	43
	12.4	Extension connector (for remote cable)	43

Drawing No. Sheet No. Revision ６
K6610091	7/43	2005/2/23

Page 7

Image 7

Hitachi HUS103014FL3800 Pin assignment, 11.1, SCSI Bus Connector C1, 11.2, Other connectors, Jumper Socket setting, 12.1

Contents

SCSI Interface Hard Disk Drive Specifications Ultrastar 10K300 - 300/ 147/ 73Hitachi Global Storage Technologies 2005/2/23 Drawing No. Sheet No. RevisionK6610091 2/43Influence for environment General cautions for safetyHeadline of safety caution To use this product safelyTo use this product safely Continued Safety cautions for this productTo use this product safely Continued Warranty and Limited LiabilityEnvironmental conditions and reliability Jumper connector layout SCSI Bus Connector C1Other connectors Jumper Socket settingTable 1.1 Models 1 Features2 Standards and Related Documents 10K300-147 Table 3.1 Characteristics3 Description 10K300-300K6610091 Table 3.2 Environmental conditions and reliability3.2 Environmental conditions and reliability Drawing No. Sheet No. RevisionFigure 3.1 Vibration test direction Figure 3.2 Shock test direction Table 3.3 Power measurement Operating 5.0V +/-5% 4 DC power InterfaceTable 4.1 DC Power Requirement +5V DCTable 4.2 Start and Stop time Fig 4.1 Current transition for +12V+12V Current A receiving the previous drive’s Ready condition or 1. If Disable Auto Start mode is set C39-10 installedManually power on drives at intervals of more than 10 seconds 4.3.2 Spindle Start SelectionFigure 5.1 Cabling layout WIDE LVD drive 5 Connecting Methods19/43 5.2 Low voltage differential LVD modeDrawing No. Sheet No. Revision K66100916 SCSI Interface 11 Write Cache 8 Tagged Command Queuing9 S.M.A.R.T. Self - Monitoring, Analysis and Reporting Technology 10 Automatic Read ReallocationTable 6.1 SCSI Commands Supported 7 Mounting and Handling Table 6.1 SCSI Commands Supported ContinuedFig. 7.1 Orientations Figure 7.2 Example for mounting HDA upper surface spacer PCB parts side147 max Figure 7.3 Layout of Mounting holes26.1 max Reliability temperature Table 7.1 Temperature Limits unit CFigure 7.4 Temperature Measurement Points Maximum temperature8 Precautions for handling 9 Maintenance 10 Physical interface Table 10.1 Interface connectorsTable 10.3 Interface cable WIDE, LVD mode Table 10.2 Interface cable WIDE, Single-ended modeFigure 10.2 Connector view Figure 10.1 Connector Layout WIDE LVD drive6.35±0.25 Figure 10.3 Connector Layout SCA-2 LVD driveFigure 10.4 Connector view 101.6±0.2511 Pin assignment Table 11.1 Pin assignment of SCSI Bus Connector C1WIDE, Single-ended mode Table 11.2 Pin assignment of SCSI Bus Connector C1 WIDE, LVD mode SCA-2, Single-ended mode Table 11.3 Pin assignment of SCSI Bus Connector C1Table 11.4 Pin assignment of SCSI Bus Connector C1 SCA-2, LVD mode NW drive Table 11.5 Pin assignment of Auxiliary Connector C4 WIDE LVD driveFigure 11.1 LED Driver 11.2 Other connectorsAuxiliary Connector C4 12 Jumper Socket settingFigure 12.1 Jumper connector layout WIDE LVD drive Option Jumper Connector C3Remove all Jumper Sockets Default 12.2 Jumper socket settingThe Jumper sockets should be set only when the power is off Option Jumper Connector C3Option Jumper Connector C3 12.2.4 Enable Delayed Start WIDE LVD 12.2.5 SCSI bus Terminator Power WIDE LVD Table 12.1 Jumper socket Table 12.2 Extension connector

Pin assignment

11.1

SCSI Bus Connector C1

11.2

Other connectors

Jumper Socket setting

12.1

Jumper connector layout

12.2

Jumper socket setting

12.3

Jumper socket part number

12.4

Extension connector (for remote cable)

7/43