Caution
8 Precautions for handling
The drive is sensitive to shock, vibration, over voltage, temperature, humidity, corrosive gas, magnetic force and electrostatic discharge.
If these forces contact the electrical or mechanical components (magnetic heads, magnetic disks), the drive will break down, degrade, or storage data will be lost. The following handling guidelines are mandatory.
(1)Handle the drive on the appropriate cushion (for example,
(2)Handle the drive with a wrist band, an
(3)Handle the drive in an environment (Temperature, Moisture, Corrosive gas), which follows the drive specification and prevents unforeseen complications.
8.1Packing
After cleaning the drive, pack it in the following manner to protect it from moisture.
(1)Put the drive in an
(2)Packing materials, i.e.
(3)If the package has no damage after unpacking, reserve it for storage or Transportation of the drive.
But
When less than 19 units, it is recommended to use the
8.2Transportation
(1)Pack the drive so as to maintain
(2)When you take the drive out of the packing case and carry it on a hand truck, lay it on cushioning material (for example, urethane foam cushioning with a thickness of 10mm or more).
8.3Storage
When storing, pack the drive to protect it against moisture. (Refer to section 4.2) In case that storage period becomes long, exchange a desiccant and repack. This operation shall be executed every 3 months. (Recommendation)
Drawing No. Sheet No. Revision ６ | ||
K6610091 | 27/43 | 2005/2/23 |
