Samsung NP-Q1UA000/SEI, NP-Q1U/YM/SEG manual Installing/Removing the Battery, Precautions

Battery

Please refer to the following instructions when running the computer on battery power without connecting the AC power.

A Lithium-Ion smart battery is supplied with this computer.

Carefully read and follow the precautions printed on the battery before using the battery.

Precautions

Use only chargers specified in the User Guide.

Never heat the battery pack, put it near or in a fire or use at a temperature higher than 60°C, as this may cause fire.

Never cause a short circuit between the battery pack terminals or disassemble the battery pack.

Carefully read and follow the precautions printed on the battery and the safety instructions in the User Guide before using the battery.

Please refer to the system operation environment ( p.196) of this guide. Operate and store the battery at room temperature.

Installing/Removing the Battery

1 Shutdown the system and place the computer upside down on a flat surface.

2 Lift the Stand up and push the Battery Latch down into the Release () position.

Lift the battery up and separate it.

Release

165