Samsung NP-Q1U/NLX/SEF, NP-Q1U/YM/SEG Other, Cannot run any functions, Power Switch does not work

Other

Q I cannot run any functions.

A1 This may happen when the computer is in the HOLD status. When pressing a button or switch in the HOLD status, the Charge LED blinks for a moment. Slide the HOLD switch downwards and try again.

A2 If the computer is running on battery power, check the battery charge status.

Q The [Power Switch] does not work.

A1 This may happen when the computer is in the HOLD status. When pressing a button or switch in the HOLD status, the Charge LED blinks for a moment. Slide the HOLD switch downwards and try again.

A2 If the computer is running on battery power, check the battery charge status.

Q How can I install the program?

AYou can additionally purchase and install the following devices for UMPC. (See the Installing Programs section of the ‘Getting Started Guide’.

●External USB ODD dedicated to UMPC or Compatible External USB ODD

●External USB HDD

●USB Data Cable

●LAN Cable (direct cable or cross cable), etc. : Since the usage of a direct cable is the same as that of a cross cable, refer to the ‘Getting Started Guide’.

194