Samsung NP-Q1U/002/SES, NP-Q1U/YM/SEG, NP-Q1U/001/SEG Method 1. Configuring with the MENU Button

Method 1. Configuring with the MENU Button

1 Connect the monitor and touch the MENU button to launch the MENU program.

MENU button (For models with the Touch Sensor button only)

MENU button

(For models without the Touch Sensor button only)

LCD/CRT Item

2 Press the button to the right of the LCD/CRT button to switch to a different mode. Whenever you press the button to the right of the LCD/CRT button, the computer screen is output to LCD > CRT > LCD+CRT Clone > LCD+CRT Dual View mode, in this sequence.

●LCD: You can view the computer screen through the LCD only.

●CRT: You can view the computer screen on an external monitor.

●LCD+CRT Clone: When selecting this mode, you can view the same screen on both the LCD and the external monitor.

●LCD+CRT Dual View: When selecting this mode, you can view a screen spanning over the LCD and the external monitor, and you can set different resolutions for each display device.

Displaying the computer screen on an external monitor only, may not be supported with the MENU button. In this case, to display the screen on an external monitor, try using the Intel program. p.69

68