Samsung NP-Q1U/001/SEI manual Inspecting and Healing Viruses, Configuring the McAfee Firewall

Inspecting and Healing Viruses

The procedures to check if the computer’s files or information have been infected by a virus and to heal viruses found by McAfee are described below.

1 Click Start > All Programs > McAfee > McAfee SecurityCenter.

2 Click the Scan button on the left side of the program.

The Scan begins. At this time, if a virus is found, it is immediately healed during the inspection.

3 If a virus has been found, click View Results.

The viruses are listed. Since the corresponding viruses have already been removed, you can use your computer without any concern.

■For possible virus infections (where it is not completely certain), the Detected message appears.

In this case, the items will be maintained or deleted depending on your decision.

■To deal with new viruses, please always keep McAfeeSecurityCenter up to date. In general, it is automatically updated when connected to the Internet.

Alternatively, you can update it manually by clicking Update

() after connecting to the

Internet.

Configuring the McAfee Firewall

The McAfee Firewall is configured for the product when purchasing the product in order to protect the computer from viruses. However, if the firewall is activated, you may not connect to the network or the Internet properly. In this case, you have to change the settings as follows.

134