Samsung NP-Q1U/000/SER, NP-Q1U/YM/SEG manual Wired Network LAN Related, Q The Wake On LAN function

Wired Network (LAN) Related

Q The <Wake On LAN> function

A<Wake On LAN> is a function that activates the system from Sleep mode when a signal (such as a ping or magic packet command) arrives over the network (wired LAN).

Using the <Wake On LAN> Function

zClick on My Network Place > View network connections on the Desktop.

x Right-click(press and hold the Stylus Pen for more than 3 seconds) the Local Area Connection and click Properties.

cClick Configure, and select the Power Management tab. Select ‘Allow this device to bring the computer out of standby’, then click OK. Restart the system.

■If the system in standby mode is activated when there is no received signal, use the system after disabling the <Wake On LAN> function.

■When turning the power off when <Wake On LAN> is disabled, the LAN LED may continue to be lit up.

■The <Wake On LAN> function operates only when the LAN is ON.

■Connecting a wired LAN while using a wireless LAN may not activate the <Wake On LAN> function. Set the Wireless LAN to ‘Disable’ to use the <Wake On LAN> function.

zClick on My Network Place > View network connections on the Desktop.

xRight-click(press and hold the Stylus Pen for more than 3 seconds) over

Wireless Network Connection and select Disable.

181