Samsung NP-Q1U/YM/SEI, NP-Q1U/YM/SEG Click OK and then OK again in the Profile Management window

3 In the Profile Management tab, click Scan to search for available wireless networks.

4 Select the name of an access point (AP) to connect to from the network name (SSID) and then click Activate.

5 Enter a profile name to be used for the connection and select the security settings of the AP to be connected to in the Security tab.

The network authentication, encryption type and password of an access point are configured through the access point management program. For the security information, check the security settings of an access point or ask your wireless network administrator.

Refer to the following when configuring a WEP key.

■Data encryption (WEP): The IEEE 802.11 WEP (Wired Equivalent Privacy) standard defines two levels of encryption, a 64-bit key (this is sometimes represented by 40bits) and a 128-bit key.

When connecting to an Atheros access point, you can use the 152- bit key (32 hexadecimal digits or 16 ASCII characters).

■Key index: Select the current encryption key index used by the access point from between 1 to 4.

■Using an encryption key: Enter 5 (for 64-bit) or 13 (for 128-

bit) alphanumeric characters (represented by 0-9, a-z, or A-Z).

6 Click OK and then OK again in the Profile Management window.

If the profile is created, the profile appears in the Profile Management tab list and the connection is established.

92