Samsung NP-Q1UF000/SEI, NP-Q1U/YM/SEG, NP-Q1U/001/SEG manual Click Run Enrollment Wizard to start

2

3

Click Run Enrollment Wizard to start

the registration.

For the integrated password authentication step, complete the following.

Enter the Windows user ID and logon password and click the Next button.

If you do not enter a logon password, the integrated password authentication function will be permitted to anyone; it is therefore recommended entering a logon password.

Creating a user logon password. z Select Start > Control Panel

> User Accounts > Create password for user account.

x Enter a password in the New Password field, and re-enter the password in the Confirm New Password field. Click Create Password. A password has been created.

4 To register a fingerprint, click on AuthenTec Fingerprint Device and then click the Next button.

5 The fingerprint registration begins. Select the finger to be registered and click the Next button.

6 Register the fingerprint by placing your finger over the fingerprint identification sensor and placing it down slowly.

Repeat this at least 3 times until the next screen appears automatically.

7 Place the registered finger over the fingerprint identification sensor again and click the Next button.

8 A window appears asking if you want to register an additional fingerprint. Click No to proceed to the next window.

If you click Yes, Steps 4~7 are repeated.

9 Proceed with the settings and click the Next button.

137