Samsung NP-Q1U-AIR/SEF, NP-Q1U/YM/SEG Setting a User Password, Activating the Booting Password

3 Enter the password with the keypad and press the Enter button. Reenter the password and press the Enter button.

You can use up to 7 alphanumeric characters for a password but you cannot use special characters.

The ← key on the keypad performs the role of Delete and the ◄ button performs the role of the Cancel (Esc) function.

To enter a number, press Num Lock and then enter the number.

If you do not press Num Lock, the characters of the corresponding keys are entered instead of digits.

4 When a message confirming the password configuration appears in the [Setup Notice] window, press <Enter>.

The supervisor password has been set. The supervisor password is required to turn the computer on or to enter System Setup.

Setting a User Password

Users can start the system with a user password, but cannot enter the System Setup. By doing this, you can prevent other users from entering Setup.

Before configuring a user password, a supervisor password must have been configured. Deactivating the supervisor password also deactivates the user password.

In the Set User Password item, press <Enter> and complete the procedures of Step 3 of Setting a Supervisor Password.

Activating the Booting Password

Before activating the booting password, a supervisor password must have been configured.

Set the Password on boot option to Enabled. From now on, system booting will not proceed without the password.

162